Time Saver Motors and Compressors

If you are not aware, our Source 1 parts has a line of universal motors and compressors available for your uses.

Any Time Saver Motor or Compressor can be used for WARRANTY replacement parts.  This is another “tool” to use when trying to provide your customers “timely” parts for equipment..  Just be sure to remember that when substituting a Time Saver Compressor that there may be a little piping differences, but do not hesitate to use Time Saver products for any warranty if you do not have the exact part in stock.

With Time Saver Compressors, keep in mind that they are ALL 208/230 1 phase and are all R-22 refrigerant only.  When using a Time saver compressor, you can choose either Recip or Scroll based on what they have and then just look at the “capacity” (tonnage/BTU).  Be sure to provide a new CAPACITOR per the chart with the substituted compressor.

An added bonus is to have Time Saver Motors (usually 4 motors cover most residential applications— 2 condenser and 2 blower) in your inventory and you can use them for both in warranty and out of warranty products.

Time Saver Compressors 7_1_11

Time Saver motor information

About yorkcentraltechtalk

I have been in the HVAC industry most of my life. I worked 25 years for contractors on anything from residential to large commercial boilers and power burners. For the past 23+ years I had been employed by York International UPG Division ( a division of Johnson Controls) as a Technical support/Service Manager but I am now retired. One of my goals has always been to "educate" dealers and contractors. The reason for starting this blog was to share some knowledge, thoughts, ideas, etc with anyone who takes the time to read it. The contents of this blog are my own opinions, thoughts, experiences and should not be construed as those of Johnson Controls York UPG in any way. I hope you find this a help. I always welcome comments and suggestions for postings and will do my best to address any thoughts, questions, or topics you may want to hear about. Thanks for taking the time to read my postings! Mike Bishop
This entry was posted in HVAC Tech Support. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s